Sale!

Powerbox Champion

£449.99 £445.99

Available on backorder

Description

Powerbox Chamption

Please Note, all powerbox Units are ordered on confirmation of order, Please allow 5 days for delivery

 

Features
PowerBus: 2 outputs, 16 + 2 channels, compatible with other servo bus systems
Servo-Match function: servo centre, end-points and reverse for all 24 servo outputs
Door sequencer: six freely programmable outputs with set-up assistant
SRS: Serial Receiver System provides the facility to use receivers with serial interface: Spektrum DSM2 and DSMX, Multiplex M-Link, Futaba S-Bus, HoTT, JR X-BUS and Jeti R-SAT2
Unrestricted channel assignment for all 24 PowerBox outputs
Graphic LCD screen with 128 x 64 pixels
Extremely user-friendly menu-based programming using the SensorSwitch
Up to 18 channels – depending on the radio control system in use
Signal amplification and interference suppression for all 24 outputs
Flight recorder, recording of lost frames, fail-safe events and all battery data
Variable frame rate, range 9ms – 21ms
Two 16-bit processors for fast, high-resolution signal processing
2 x double-regulated output voltages for receivers and servos
2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V
Connection facilities for Futaba, Jeti, Spektrum, HoTT and Multiplex MSB downlink bus systems
Direct transmission of battery voltage, capacity, RX-data and GPS data to the transmitter
Separate voltage and capacity display for each battery
Minimum value memory alerts the user to voltage collapses
Large-area heat-sinks for high regulator performance
Regulator monitoring, regulator error indicator
Support for three battery types: LiPo, NiMH / NiCd, LiFePo
Suppression of any servo feedback currents which may occur
Updateable with PowerBox Systems USB Interface connectors
less

Technical Data

Operating voltage
4.0V – 9.0V
Power supply
2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state
185mA (with LCD)
Current drain Standby
30µA
Maximum load current
Peak 4x20A
Drop-out voltage
0.3V
Output voltage
5.9V and/or 7.4V regulated
Signal input
serial

Supported RC systems
Spektrum, Futaba, HoTT, M-Link, Jeti, JR
Receiver redundancy
SRS
Channels
18
Servo sockets
24
Programmable servo outputs
24
Servo signal resolution
0.5µs
Signal frame rate
9ms, 12ms, 15ms, 18ms, 21ms
Screen
LCD, backlite
Integral door sequencer
yes
Supported telemetry systems
Futaba, Jeti, Spektrum, HoTT, M-Link
Dimensions
136 x 82 x 20 mm
Weight
158g
Weight Sensor Switch
15g
Weight of LCD screen
65g
Temperature range
-30°C to +75°C
less

Set contents
PowerBox Champion SRS
LCD screenSensorSwitch
2 three-core patch-leads, 180 mm
4 retaining screws
4 rubber grommets / brass spacer sleeves, fitted
Operating instructions in German and English

Reviews

There are no reviews yet.

Be the first to review “Powerbox Champion”

Your email address will not be published. Required fields are marked *